IOSH Managing Safely is assessed in two parts: a written paper at the end of the course and a practical risk assessment project. For the project you assess real hazards in your own workplace, decide what more should be done and explain your priorities. You must pass both parts to get the certificate.
How the assessment works
Managing Safely is a three-day course for managers and supervisors in any sector, covering six areas: assessing risks, controlling risks, understanding responsibilities, understanding hazards, investigating incidents and measuring performance. IOSH sets the assessment, and approved trainers mark it against IOSH’s criteria. IOSH does not publish the question format, pass marks or the project form on its website, so your trainer explains the exact rules on the course.
- The written paper tests what you learned across the six areas. On our courses it is a 30-question paper taken at the end of the course.
- The risk assessment project shows you can apply what you learned to a real workplace. On our courses it is completed as part of the course rather than sent away. Some providers set a deadline shortly after the course instead, so if you train elsewhere, check when yours is due.
Your trainer gives you the project form and instructions, so follow those exactly. This guide shows the thinking behind a good answer, not the official form or marking scheme.
The thinking a good project shows
Risk assessment is a legal duty, not just a course exercise: the Management of Health and Safety at Work Regulations 1999 require employers to make a suitable and sufficient assessment of the risks to employees and others. A good project works through the same steps.
- Hazards: things with the potential to cause harm, described specifically, with where and why.
- Who could be harmed and how: staff, visitors, contractors, and the injury or illness that could result.
- Existing controls: what is already in place, honestly recorded.
- Risk: how likely harm is and how serious it would be, using the rating scale your form gives you.
- Further action: what more is needed, following the hierarchy of control, with who is responsible and by when.
A worked example: a warehouse loading bay
The example below is an illustration only. It is not IOSH’s form or marking scheme, and your own project must come from what you see in your own workplace.
Hazard 1: forklift trucks and pedestrians sharing the loading bay
| Step | What you might write |
|---|---|
| Who and how | Warehouse staff and delivery drivers; struck by a moving truck, causing crush injuries or death |
| Existing controls | Trained, authorised drivers; speed limit sign; hi-vis worn |
| Risk | Likely and very serious, because delivery drivers walk across the bay to sign paperwork |
| Further action | Marked pedestrian walkway with barriers; a drivers’ waiting area away from the bay; paperwork handed over at a hatch. Site manager, within 4 weeks |
Hazard 2: pallets and wrapping left on the floor at the dock edge
| Step | What you might write |
|---|---|
| Who and how | Staff loading vehicles; trips and falls, including a fall from the dock edge |
| Existing controls | Weekly housekeeping check |
| Risk | Likely, and moderate to serious |
| Further action | Designated pallet bay; waste bins at each door; end-of-shift clear-down; dock edge marking renewed. Team leader, within 1 week |
Notice the pattern. Each action removes or reduces the hazard before relying on people behaving well, which is the hierarchy of control in practice. Each action also has an owner and a deadline.
Explaining your priorities
Good projects finish by explaining which actions come first and why. In the example, separating people from forklifts comes first because the harm could be fatal and the current controls depend on behaviour. Housekeeping comes next because a trip is likely and the fix is cheap and quick.
Common mistakes
- Vague hazards such as “slips” with no location or cause
- Listing training or signs as the only control for a serious risk
- Actions with no owner or timescale
- Copying a generic template instead of assessing what you actually see
Before the course
Pick an area at work you know well, and walk it with fresh eyes before day one. Our free IOSH Managing Safely mock test is a good way to check your knowledge before the written paper, and the IOSH Managing Safely course page has the latest dates and delivery options. If you are comparing courses, our IOSH courses page lists the full range.
Frequently asked questions
How is IOSH Managing Safely assessed?
In two parts: a written paper at the end of the course (30 questions on our courses) and a risk assessment project based on real hazards in your own workplace. You must pass both.
Can I use a template for the IOSH risk assessment?
Use the form your trainer gives you and follow their instructions. The content must come from your own workplace, not a copied example.
Does the IOSH Managing Safely certificate expire?
IOSH states that it does not expire. IOSH recommends the one-day Managing Safely Refresher to stay current, and many employers run it every three years as their own policy.
How long is the IOSH Managing Safely course?
Three days. We run it in a classroom at our Stoke-on-Trent centre, live online, or at your workplace for a group.
Read the source
Sources: the IOSH Managing Safely course page and trainer brochure on iosh.com, the Management of Health and Safety at Work Regulations 1999, and the Acadame IOSH Managing Safely course page. Facts checked on 6 November 2026.
Find a date that works
Every course, every centre, with live availability and prices.
On your site or ours, and group rates on request.



