We accept Apple Pay Google Pay & 3 interest-free instalments via Klarna · 0330 124 2165
Workplace Safety & Risk

What Is a Competent Person in Health and Safety?

The phrase competent person appears all through health and safety law. Here is what it means, who needs to appoint one and how to judge competence.

Published 6 October 2026 3 min read
Engineer in hi-vis inspecting a chain sling and hook with a torch in a bright workshop

Regulation 7 of the Management of Health and Safety at Work Regulations 1999 requires every employer to appoint one or more competent persons to help them meet their health and safety duties. The same idea runs through dozens of other regulations, where specific checks must be done by a competent person.

What does competent mean?

The regulations say a person is competent if they have sufficient training and experience or knowledge and other qualities to properly assist the employer. In other words, someone who knows enough about the work and the risks to recognise what could go wrong and what to do about it. The level of competence needed depends on the risks: a low risk office needs less specialist knowledge than a chemical plant.

The SKATE model

LetterMeaningAsk
SSkillsCan they do the task in practice?
KKnowledgeDo they understand the law, the hazards and the controls?
AAttitudeWill they take it seriously and speak up?
TTrainingDo they have relevant, current training and qualifications?
EExperienceHave they done similar work before?

In-house or external?

The Management Regulations say that where a competent person is available among your own employees, they should be appointed in preference to someone external. Many small businesses can manage with the owner or a trained manager, using external advice for specialist areas. Larger or higher risk organisations usually employ qualified health and safety advisors. If you use an external consultant, check their qualifications and IOSH membership.

Competent persons for specific checks

CheckRegulationsOur guide
Thorough examination of lifting equipmentLOLER 1998LOLER
Inspection of scaffolds and work platformsWork at Height Regulations 2005Scaffold tags
Inspection of excavationsCDM 2015Excavation safety
Inspection of work equipmentPUWER 1998PUWER
Temporary works design and checkingCDM 2015 and BS 5975Temporary works
Fire risk assessmentFire Safety Order 2005Fire Safety Order
Asbestos surveysControl of Asbestos Regulations 2012Asbestos regulations

Competence is more than a certificate

A card or certificate shows someone has been trained, but not necessarily that they can apply it. Check experience, ask questions, watch them work and review their output. Competence also has to be kept up, through refresher training and CPD, especially when the law or the work changes.

Training that helps

For the person appointed to advise a business, the NEBOSH National General Certificate is the most widely recognised qualification, and the Level 3 NVQ in Occupational Health and Safety assesses competence in the workplace. For senior practitioners, the Level 6 NVQ leads towards Chartered status. Managers can start with IOSH Managing Safely. See our health and safety career path guide for the full picture.

Frequently asked questions

What is the legal definition of a competent person?

Someone with sufficient training and experience or knowledge and other qualities to properly assist the employer in meeting their health and safety duties.

Do all businesses need a competent person?

Yes. Regulation 7 of the Management Regulations requires every employer to appoint one or more, although in a small low risk business this can be the owner.

Does a competent person need a qualification?

Not always by law, but qualifications such as the NEBOSH General Certificate are a strong way to show knowledge, especially in higher risk work.

What does SKATE stand for?

Skills, knowledge, attitude, training and experience.

Read the source

The Management of Health and Safety at Work Regulations 1999, regulation 7; HSE guidance on getting competent advice; and the specific inspection duties in LOLER 1998, PUWER 1998, the Work at Height Regulations 2005 and CDM 2015. Facts checked on 6 October 2026.

When can we do it

Find a date that works

Every course, every centre, with live availability and prices.

On your site or ours, and group rates on request.

Tell us what the job is and who is doing it, and we will point you at the right thing rather than the dearest thing.
Skip to main content