& 
ECITB CCNSG Safety Passport in Stoke-on-Trent
Two days at our Stoke-on-Trent centre, and the passport that gets you through the gate on an engineering construction site. Scheduled dates at Trent House in Fenton.
About this course
The CCNSG Safety Passport is the national scheme for engineering construction. Power stations, refineries, chemical and process plants, water and waste treatment: sites where a CSCS card is not what they are asking for.
It is two days and it is assessed. The content covers the hazards specific to engineering construction, the permit systems that control them, and the behaviours a site expects from anybody walking onto it. The passport that follows is valid for three years.
Stoke sits within reach of a lot of process and utilities work across Staffordshire, Cheshire and the west Midlands, and it is one of the courses we run most often here.
The centre is Trent House, 234 Victoria Road, Fenton, Stoke-on-Trent ST4 2LW. Fenton sits just off the A50 and the A500, a few minutes from junction 15 of the M6, and Stoke-on-Trent station is a short taxi ride away.
We draw candidates from Newcastle-under-Lyme, Stafford, Crewe, Congleton, Leek, Cheadle, Uttoxeter, Market Drayton and the wider Staffordshire and south Cheshire area. If a date at Stoke-on-Trent does not suit, the same course runs at our other centres and we can deliver it at your own premises anywhere in the UK.
- Health and safety law: what it asks of you, what it asks of your employer, and where the two meet
- Hazards and risk on an operational site, and the difference between the two in practice rather than on paper
- Safe working practices: permits, isolation, confined spaces, work at height and the controls that go with them
- Tools, plant and equipment, and the checks that happen before anybody uses them
- Emergency response: what to do, who to tell, and how a site expects an incident to be reported
- Your own responsibility on site, which is the part the card is really certifying
How completing this course helps you
- A CCNSG Safety Passport card, valid for three years and recognised across engineering construction
- Access to client sites that will not let an uncarded contractor through the gate
- A common baseline across a crew, so a toolbox talk starts from shared ground
- Something concrete for a client or a tender asking what safety training your people hold
Who should attend?
Anybody who needs site access to an engineering construction site in and around Stoke-on-Trent: mechanical and electrical fitters, welders and fabricators, pipefitters, riggers, scaffolders, insulation and cladding teams, instrument technicians, labourers and the supervisors and visitors who need to get past the gate. Contractors travelling to sites across the Midlands and the north west book it here regularly.
Entry requirements. None. The course assumes no prior safety training. You will need a reasonable standard of spoken and written English, because the assessment is written and taken in English.
Ready to take the next step?
Choose a delivery option, compare dates and book with confidence, or ask MB and get an answer straight away.
At Stoke-on-Trent
What to expect on the day
The course is the same wherever you sit it. What changes is the room, the journey and the people in it, and those matter more than providers usually admit.
Our Stoke-on-Trent centre is Trent House, 234 Victoria Road, Fenton, Stoke-on-Trent ST4 2LW. Fenton sits just off the A50 and the A500, a few minutes from junction 15 of the M6, and Stoke-on-Trent station is a short taxi ride away. Joining instructions go out ahead of the course with timings, what to bring and where to go when you arrive.
If you are booking for a group and travel is the problem, we deliver this course at employers’ own premises anywhere in the country. For six or more people that is usually cheaper per head and nobody loses a day on the road.
Before the day
Joining instructions with timings, the address and what to bring. Tell us at booking if anybody needs support with reading, writing or access and we will sort it quietly.
On the day
Arrive a few minutes early. Bring photographic identification, which most awarding bodies require before they will certificate you.
Afterwards
We tell you the outcome and handle the registration and certification with the awarding body. If anything needs resitting we will get it booked.
Method of assessment
How the CCNSG Safety Passport is assessed
The ECITB set the assessment and it is taken at the end of the second day.
Two days in the room
Taught face to face, built on discussion and on what the group has actually seen on site. Full attendance is required before the assessment.
The ECITB assessment
A knowledge test at the end of the course, set by the ECITB rather than by us.
Your card
A CCNSG Safety Passport valid for three years. Renew it before it expires with the one day renewal rather than sitting the full two days again.
Ways to learn
How you can take this course
Every route covers the same accredited syllabus and the same support. Pick the one that fits how your people work.
Dates and locations
Pick a date
Live availability from our booking system. Prices exclude VAT.
No dates match that filter. Ask us for one.
Can't see a date that works? Request one - we add dates most weeks.
Also available
In-company training
We run this one to order, at your place or ours.
Onsite / in-company
Run CCNSG Safety Passport at your site
We deliver anywhere in the UK, on your dates and around your shift patterns. For six or more people it is usually cheaper per head than sending everyone to a centre, and nobody loses a day travelling.
Tell us roughly how many people and when, and we will come back with options and a price, or ask MB and get an answer straight away.
What onsite includes
- The same tutor, materials and certification as our centres
- Your venue or one we arrange near you
- Dates and start times built around your operation
- One invoice and one point of contact for the whole group
- Content examples drawn from your own workplace
CCNSG Safety Passport FAQs
Three years. Renewal is a one day course rather than the full two days, and it has to be done before the passport expires. Once it has lapsed you are back on the full course, which is a day longer and considerably more annoying.
Yes, and it is not optional. ECITB require photographic ID before they will issue a passport, so bring a passport or a photocard driving licence on the first morning. No ID means no card, whatever happens in the room.
No. CSCS covers construction sites. CCNSG is the safety passport for engineering construction: power stations, refineries, chemical plants, water treatment and similar. A site that asks for CCNSG will not accept a CSCS card in its place.
Trent House, 234 Victoria Road, Fenton, Stoke-on-Trent ST4 2LW. Fenton sits just off the A50 and the A500, a few minutes from junction 15 of the M6, and Stoke-on-Trent station is a short taxi ride away. Full joining instructions with timings go out before the course.
The same course runs at our other centres in Stoke-on-Trent, Derby, Manchester and Liverpool, and we deliver it at employers’ own premises anywhere in the UK. Tell us roughly when you need it and we will find something or put a date on.
Yes, anywhere in the country. For six or more people it normally works out cheaper per head than sending everybody to a centre, and we can build the day around your shift patterns.
From the blog
Course guides and news
The latest plain-English guides to choosing the right course, card or qualification.
Training for a team?
One contact for all your workforce training
Book this course for a group at your site or ours, roll it into a managed training plan and let us handle the scheduling, certificates and renewals.